MIR Spirobank II Advanced is a portable spirometer for use in the clinic and for off-site examinations.
Respiratory equipment 92
Portable spirometry and pulse oximetry
MIR Spirolab combines spirometry testing, viewing results and printing reports in one device.
Compact spirometer with Bluetooth connectivity to the MIR Spirobank smartphone app.
Spirometer with a built-in SpO₂ and pulse rate sensor for use with a smartphone app.
Reusable turbine flow sensor with a metal mesh for compatible professional MIR spirometers. Used with a paper or plastic mouthpiece purchased separately.
MIR Spirotel is a compact spirometer with a digital turbine sensor for lung-function testing.
Calibration syringe with a nominal volume of 3 L for checking and calibrating compatible spirometers.
System with an electrochemical sensor and a 10.1-inch touchscreen for quantitative analysis of nitric oxide in exhaled air and on-screen monitoring of the measurement process.
Cardiopulmonary exercise testing system with an Ergoflow flow sensor and BLUE CHERRY® software.
OXYDOC CPAP/APAP Black Edition is a non-invasive ventilation device supplied with a humidifier and a size M mask. Operating pressure is adjustable within 3–25 mbar. The E-FLEX function has three levels and can be switche
OXYDOC CPAP/BiPAP/ST Black Edition is a non-invasive ventilation device supplied with a humidifier and a size M mask. The stated IPAP range is 3–30 mbar in 0.1 mbar steps; settings for transitions between breathing phase
Invacare PerfectO2 REF is a refurbished stationary oxygen concentrator with adjustable flow of 0.5–5 L/min. REF means Refurbished: this is not a new device.
Philips Respironics EverFlo REF is a refurbished stationary oxygen concentrator with adjustable flow of 0.5–5 L/min. REF means Refurbished: this is not a new device.
DeVilbiss iGo2 is a portable concentrator with pulse oxygen delivery. According to the price list, the device weighs 2.25 kg and measures 213 × 89 × 218 mm.
DeVilbiss iGo2 with an additional battery is a portable concentrator with pulse oxygen delivery. According to the price list, the device weighs 2.25 kg and measures 213 × 89 × 218 mm.
DeVilbiss 525 is a stationary concentrator with a maximum oxygen delivery of 5 L/min. The model produces an oxygen mixture from ambient air.
DeVilbiss 1025 is a stationary concentrator with continuous oxygen delivery of up to 10 L/min. The source specifies an operating range of 2–10 L/min.
The replacement battery is intended for the DeVilbiss iGo2 portable concentrator. This is a separate power source, not a kit containing a concentrator.
OXYDOC AII-5 is a stationary concentrator with adjustable flow of 0.5–5 L/min. The oxygen concentration stated by the supplier is 93 ± 3%.
OXYDOC CP501 is a stationary concentrator with adjustable flow of 0.5–5 L/min. The oxygen concentration stated by the supplier is 93 ± 3%.
OXYDOC CP101 is a stationary concentrator with adjustable flow of 1–10 L/min. The oxygen concentration stated by the supplier is 93 ± 3%.
OXYDOC CP101-1.4A is a stationary concentrator with adjustable flow of 1–10 L/min. The oxygen concentration stated by the supplier is 93 ± 3%.
H107 is a concentrator with seven delivery levels in the 1–7 L/min range. The nominal concentration of 90% +6% / −10% is given only for a flow of 1 L/min and does not describe all modes.
Inogen Rove 6 is a portable oxygen concentrator with pulse oxygen delivery and six settings from 1 to 6. It delivers oxygen in response to inhalation; these settings do not mean continuous flow of 1–6 L/min. According to
KSW-5 is an oxygen concentrator with a digital flow meter and a large screen. The source lists an oil-free compressor and a filtration system.
KSOC-10 is an oxygen concentrator with delivery of up to 10 L/min and a stated concentration of 93 ± 3%. The output pressure specified is 30–70 kPa.
JAY-10 is an oxygen concentrator with delivery of 0.5–10 L/min and a stated concentration of 93 ± 3%. The name indicates a dual-flow configuration; distribution between the outlets should be confirmed.
OxyBreath Mini 5 is an oxygen concentrator with delivery of 0.5–5 L/min and a stated concentration of 93 ± 3%. This configuration has an oxygen sensor. Power supply: 220–240 V, 50/60 Hz.
OLV-10 is an oxygen concentrator with delivery of 0.5–10 L/min and a stated concentration of 93 ± 3%. The model operates on 220–240 V, 50/60 Hz mains power.
OXYTEC is an oxygen concentrator with a flow of 1–5 L/min and an oxygen-delivery indicator. Stated weight is 16 kg and power consumption is approximately 300 W.
OXYDOC CPAP/APAP is a non-invasive ventilation device supplied with a humidifier and mask. Operating pressure is adjustable within 3–20 mbar. The E-FLEX function has three levels and can be switched off.
OXYDOC CPAP/BiPAP/ST is a non-invasive ventilation device supplied with a humidifier and mask. The stated IPAP range is 3–30 mbar in 0.1 mbar steps; settings for transitions between breathing phases are available.
OXYDOC CPAP/BiPAP/ST/AVAPS is a non-invasive ventilation device supplied with a humidifier and mask. I-SLOPE and E-SLOPE settings, as well as inhalation and exhalation sensitivity settings, are provided.
The OXYDOC humidifier is a separate accessory for adding moisture to air delivered by a compatible CPAP/APAP device. It is intended for use as part of a breathing system.
The OXYDOC breathing circuit connects a respiratory therapy device to a mask. The supplier describes this accessory as a flexible circuit for air delivery.
The Philips Respironics DreamStation humidifier is an accessory for compatible CPAP and BiPAP devices in this series. The source states a capacity of 325 ml and adaptive humidification control.
Philips Respironics DreamStation 2 Auto is a CPAP device with a built-in humidifier and a colour touchscreen. The Ramp Plus function allows starting pressure to be set.
ResMed AirMini is a compact CPAP device weighing approximately 300 g. According to the source, the housing measures 13.6 × 8.4 × 5.2 cm.
ResMed AirSense 10 AutoSet is a device with automatic pressure adjustment. This offer includes a HumidAir humidifier, as stated in the kit name.
ResMed AirSense 10 AutoSet in this kit is supplied with a mask. According to the specification, it has a pressure range of 4–20 cm H₂O and AutoRamp and SmartStart functions.
The ResMed AirSense 11 in this offer is an automatic CPAP device with a humidifier. A mask is not listed in this kit name, so its inclusion must be confirmed separately.
The ResMed AirSense 11 in this offer is an automatic CPAP device with a humidifier and mask. The mask distinguishes this kit; its type and size should be agreed when ordering.
KMV5010 supports pressure-controlled and volume-controlled ventilation. The 3.5 kg device displays current pressure, flow and volume parameters on its screen.
VENTWAY SPARROW VWSP-1000MR EMS+MRI is an emergency-care ventilator with SIMV-VC-PS, SIMV-PC, CPAP and HFNC modes. The supplied specification also lists a CPR mode.
VENTWAY SPARROW VWSP-9000 is an emergency-care ventilator with SIMV-VC-PS, SIMV-PC, CPAP and HFNC modes. The supplied specification also lists a CPR mode.
VENTWAY SPARROW VWSP-9000MR is an emergency-care ventilator with SIMV-VC-PS, SIMV-PC, CPAP and HFNC modes. The supplied specification also lists a CPR mode.
Bio2flow is a high-flow oxygen therapy system with flow adjustment from 5 to 110 L/min. It provides humidification, FiO₂ control and a built-in nebuliser.
BIOAQUA is intended to humidify the breathing circuit during invasive and non-invasive ventilation. It is controlled through a 3.5″ touchscreen.
The turbine-driven Eshero SH320 supports invasive and non-invasive ventilation, including APRV and PRVC modes. Its interface provides waveforms, loops and 72-hour trend review.
Eshero SH230 is a portable ventilator with a 5.6″ touchscreen. It provides A/C, SIMV, SPONT and NIV-CPAP modes and displays respiratory parameters.
Eshero SH300 has a turbine drive and VCV, PCV, SIMV, PSV, CPAP and BACKUP modes. When comparing configurations, it is important to distinguish standard capabilities from the HFO and NIV options listed in the source.
The portable Eshero SH200 provides A/C, SIMV, SPONT and SIGH modes. Its touch-controlled LCD display is used to configure ventilation and monitor parameters.
JAY-10-4.0 is an oxygen concentrator with output of 0.5–10 L/min. Stated output pressure is 0.14–0.40 MPa and power consumption is 850 W.
JAY-15 is an oxygen concentrator with output of 0.5–15 L/min. Stated output pressure is 0.14–0.40 MPa and power consumption is 2200 W.
JAY-20 is an oxygen concentrator with output of 0.5–20 L/min. Stated output pressure is 0.14–0.40 MPa and power consumption is 2100 W.
ResMed AirFit F40 is an oronasal mask for positive airway pressure therapy. Its design includes a silicone cushion and a flexible frame with a soft surround.
ResMed AirFit P10 is a nasal mask for positive airway pressure therapy. Its design includes nasal pillows, elastic QuickFit headgear and QuietAir venting.
ResMed AirFit N30 is a nasal mask for positive airway pressure therapy. Its design includes a compact frame, adjustable headgear and QuietAir venting.
The humidifier is intended for the ResMed AirSense 10 / Lumis 150 system. It is a separate accessory for air humidification in a compatible device.
The humidifier is intended for the ResMed AirSense 11 system. It is a separate accessory for air humidification in a compatible device.
The ResMed breathing circuit for AirSense 10 connects the device to the mask. This item includes tube heating.
The ResMed breathing circuit for AirSense 10 connects the device to the mask. The supplier’s name specifies a 22 mm size.
The ResMed breathing circuit for AirSense 11 connects the device to the mask. This item includes tube heating.
BMC P2 is a nasal mask for positive airway pressure therapy. Its design includes nasal pillows, a ball joint and distributed vent holes.
Philips Respironics DreamWear FIT PACK is a nasal mask for positive airway pressure therapy. Its design includes an under-the-nose cushion, fabric pads and a top-of-head tube connection.
Size M; SKU 100171. ResMed AirFit F20 is an oronasal mask for positive airway pressure therapy. Its design includes an InfinitySeal cushion and a quick-release connector.
Size S; SKU 82192541. ResMed AirFit F20 is an oronasal mask for positive airway pressure therapy. Its design includes an InfinitySeal cushion and a quick-release connector.
Size L; SKU 82192542. ResMed AirFit F20 is an oronasal mask for positive airway pressure therapy. Its design includes an InfinitySeal cushion and a quick-release connector.
Size M; SKU 100169. ResMed AirFit F30i is an oronasal mask for positive airway pressure therapy. Its design includes a top-of-head breathing-tube connection and rear headgear.
Size S; SKU 82192545. ResMed AirFit F30i is an oronasal mask for positive airway pressure therapy. Its design includes a top-of-head breathing-tube connection and rear headgear.
Size L; SKU 82192546. ResMed AirFit F30i is an oronasal mask for positive airway pressure therapy. Its design includes a top-of-head breathing-tube connection and rear headgear.
Size M; SKU 60603383. ResMed Quattro Air is an oronasal mask for positive airway pressure therapy. Its design includes headgear and a detachable design for removal and care.
Size S; SKU 82192537. ResMed Quattro Air is an oronasal mask for positive airway pressure therapy. Its design includes headgear and a detachable design for removal and care.
Size L; SKU 82192538. ResMed Quattro Air is an oronasal mask for positive airway pressure therapy. Its design includes headgear and a detachable design for removal and care.
Size M; SKU 100148. ResMed AirFit N20 is a nasal mask for positive airway pressure therapy. Its design includes a silicone cushion and a design that can be disassembled for care.
Size S; SKU 82192557. ResMed AirFit N20 is a nasal mask for positive airway pressure therapy. Its design includes a silicone cushion and a design that can be disassembled for care.
Size L; SKU 82192558. ResMed AirFit N20 is a nasal mask for positive airway pressure therapy. Its design includes a silicone cushion and a design that can be disassembled for care.
Size M; SKU 100147. ResMed AirFit N30i is a nasal mask for positive airway pressure therapy. Its design includes a top-of-head tube connection and a low-profile design.
Size W; SKU 101010. ResMed AirFit N30i is a nasal mask for positive airway pressure therapy. Its design includes a top-of-head tube connection and a low-profile design.
Size M; SKU 100154. BMC F2 is an oronasal mask for positive airway pressure therapy. Its design includes plastic and silicone components and elastic straps.
Size L; SKU 100155. BMC F2 is an oronasal mask for positive airway pressure therapy. Its design includes plastic and silicone components and elastic straps.
Size S; SKU 82193058. BMC F2 is an oronasal mask for positive airway pressure therapy. Its design includes plastic and silicone components and elastic straps.
Size M; SKU 82192908. BMC F5 is an oronasal mask for positive airway pressure therapy. Its design includes a thin transparent frame, a fastening clip and a removable swivel joint.
Size L; SKU 82193065. BMC N2 is a nasal mask for positive airway pressure therapy. Its design includes a silicone cushion, a flexible forehead support and vent holes.
Size M; SKU 82193125. BMC N2 is a nasal mask for positive airway pressure therapy. Its design includes a silicone cushion, a flexible forehead support and vent holes.
Size M; SKU 82192892. BMC N5B is a nasal mask for positive airway pressure therapy. Its design includes a modular frame without a forehead support and a ball joint.
Size XL; SKU 82193052. BMC N5B is a nasal mask for positive airway pressure therapy. Its design includes a modular frame without a forehead support and a ball joint.
Size L; SKU 82193053. BMC N5B is a nasal mask for positive airway pressure therapy. Its design includes a modular frame without a forehead support and a ball joint.
Size M; SKU 100160. Philips Respironics DreamWear Full Face is an oronasal mask for positive airway pressure therapy. Its design includes an under-the-nose cushion, a flexible frame and a top-of-head tube connection.
Size L; SKU 82193327. Philips Respironics DreamWear Full Face is an oronasal mask for positive airway pressure therapy. Its design includes an under-the-nose cushion, a flexible frame and a top-of-head tube connection.
Size S; SKU 82193328. Philips Respironics DreamWear Full Face is an oronasal mask for positive airway pressure therapy. Its design includes an under-the-nose cushion, a flexible frame and a top-of-head tube connection.
Nothing found — change the filters.



























































































