Theragun PRO Plus combines percussive massage, heating, vibration and near-infrared light. The triangular handle allows the grip to be changed when massaging different body areas.
Massage equipment 120
TheraFace Mask combines LED facial care with vibration massage. The mask is cordless and has a removable protective eye insert.
Theragun Prime Plus is a percussive massager with heating and a triangular handle. Five speeds and three temperature modes allow the session to be adjusted.
CryoTherm Palm is a cordless device for applying temperature to the palms. It can be held in the hands and used independently of other training equipment.
Neck & Chest LED is designed for care of the neck and décolletage. Its wearable design combines LED light, vibration and heating, so the device does not need to be held continuously.
SkinSpa PRO combines three interchangeable attachments: CryoCurrent for cooling and microcurrent care, 4-in-1 LED, and Heat & Massage for heating with vibration.
TheraMask Glo is a cordless LED mask with three light modes and VibraWave scalp massage. A removable protective eye insert is provided.
ThermNeck & Upper Back is a wearable massager for the neck and upper back. It combines percussive and kneading massage, heating and infrared light. Hand loops help vary the pressure of the massage nodes.
PowerDot DUO 2.0 is a set of two electrical stimulation modules for use with electrode pads. It supports TENS and NMES technologies, with programme and intensity selected through a mobile app.
Theragun Prime 6 is a percussive massager in a housing with impact-resistant rubber coating and reinforced corners. The triangular handle allows hand position to be changed when working on different body areas.
SkinSpa CryoCurrent combines cooling with microcurrent facial care. The teardrop-shaped attachment with spheres is designed to move along facial contours.
ThermFace is a face and neck massager combining percussion with adjustable heating. Its 5 mm amplitude distinguishes this model from massagers for large muscle groups.
SkinSpa ThermLED combines LED care with warm vibration facial massage. The 4-in-1 LED attachment supports red, red plus infrared, yellow and blue light.
Theragun Prime Charging Stand is a stand for upright storage and charging of the sixth-generation Theragun Prime. It helps create a dedicated place for the massager at home or in a training area.
Theragun Sense 2 is a percussive massager with an LCD and built-in step-by-step routines. The screen helps track the massage area, duration and pressure.
Theragun Sense combines percussive massage with a pulse sensor and guided breathing exercises. The colour LCD provides visual prompts, allowing the routine to be followed without constantly checking a phone.
Theragun Sense combines percussive massage with a pulse sensor and guided breathing exercises. The colour LCD provides visual prompts, allowing the routine to be followed without constantly checking a phone.
Theragun Mini Plus is a compact percussive massager with heating. The housing weighs 400 g without attachments and is convenient to carry when a full-size massager takes up too much space.
RecoveryTherm is a wearable wrap for the lower back and lower abdomen with heating and vibration. Securing it to the body leaves the hands free during the session.
ThermBack LED is an adjustable lower-back wrap combining heating, vibration and infrared light. Its wearable design allows the device to be secured without holding it continuously.
Theragun Mini 3.0 is a portable percussive massager with three speeds. One button switches the device on and changes intensity, while Travel Lock helps prevent accidental activation in a bag.
Theragun Mini 3.0 is a portable percussive massager with three speeds. One button switches the device on and changes intensity, while Travel Lock helps prevent accidental activation in a bag.
SmartGoggles 2.0 are massage goggles for the temples and area around the eyes. The model combines compression massage, warmth and vibration, while contoured padding blocks light.
Theragun Relief is a percussive massager with simple one-button control. The triangular handle allows grip changes, and three speeds allow intensity selection without complex setup.
Theragun Relief is a percussive massager with simple one-button control. The triangular handle allows grip changes, and three speeds allow intensity selection without complex setup.
TheraFace Depuffing Wand is a compact device for hot and cold facial care. The contoured applicator is designed to glide over the skin, while the Cryothermal system maintains the selected temperature.
TheraFace Depuffing Wand is a compact device for hot and cold facial care. The contoured applicator is designed to glide over the skin, while the Cryothermal system maintains the selected temperature.
RecoveryTherm Cube is a reusable device for applying local heat, cold or alternating temperatures. A frame with straps allows it to be secured to the selected area, while the aluminium contact surface transfers temperatu
Wave Roller is a vibrating massage roller with a wave-textured surface. Its cylindrical format allows rolling to be combined with vibration during self-massage.
TheraCup is a cordless vacuum massage device with heating and vibration. The three functions are adjusted with separate buttons, allowing the session to be set according to the instructions.
The replacement battery for the fifth-generation Theragun PRO allows massage to continue by swapping a depleted battery for a charged one. This is convenient for several consecutive sessions.
Wave Duo is a dual-contoured vibrating roller for neck and back massage. The central recess allows the working surfaces to be positioned on both sides of the spine, while the wave texture helps control rolling.
Hot & Cold Rings is a set of temperature attachments for the TheraFace PRO facial massager. One ring is for heating and the other for cooling; magnetic attachment makes them easy to change.
Hot & Cold Rings is a set of temperature attachments for the TheraFace PRO facial massager. One ring is for heating and the other for cooling; magnetic attachment makes them easy to change.
SleepMask is an eye mask with built-in vibration and contoured padding. Breathable Birdseye fabric and a strap provide soft contact with the face, while the mask’s shape shields the eyes from light.
The Cold Plus cooling attachment adds temperature application to a compatible Theragun Plus-series device. Three cooling levels allow temperature selection according to the instructions.
Heated Percussive Plus is an attachment combining heating with percussive massage on compatible Theragun Plus devices. It adds warmth without replacing the main massager.
Vibration Plus is an interchangeable smooth-surface attachment for vibration massage on compatible Theragun Plus devices. It adds a separate type of mechanical action to the attachment set.
The Theragun PRO charging stand combines upright storage of the massager with recharging. It helps provide a dedicated place for the device and keep it within reach.
The Theragun Elite charging stand combines upright storage of the massager with recharging. It helps provide a dedicated place for the device and keep it within reach.
The Theragun universal charging stand is one platform for several compatible devices. It is suitable for fourth- and fifth-generation Theragun PRO and Elite, as well as the Wave massage roller.
Wave Solo is a compact vibrating ball for targeted massage. Its rounded shape focuses contact on a selected area, while textured silicone helps control the ball’s position.
The Theragun PRO Plus charging stand combines upright storage of the massager with recharging. It helps provide a dedicated place for the device and keep it within reach.
The Theragun Prime Plus charging stand combines upright storage of the massager with recharging. It helps provide a dedicated place for the device and keep it within reach.
The Theragun Prime charging stand combines upright storage of the massager with recharging. It helps provide a dedicated place for the device and keep it within reach.
Duo Adapter allows two massage attachments to be fitted to one compatible Theragun device. The symmetrical arrangement creates two parallel contact points for working over a wider area.
Attachment with a soft foam contact surface for compatible Theragun percussive massagers.
Theragun Mini Stand is a metal stand for storing a Mini massager. It provides a dedicated place for the device on a desk, shelf or in a training area.
Standard Ball Plus is an interchangeable Theragun attachment with a medium-sized rounded shape for contact with different muscle groups. Its geometry allows the nature of contact during percussive massage to be changed.
Dampener Plus is an interchangeable Theragun attachment with a soft rounded shape and a broad contact area. Its geometry allows the nature of contact during percussive massage to be changed.
Thumb Plus is an interchangeable Theragun attachment with a shape that imitates thumb pressure for working on small areas. Its geometry allows the nature of contact during percussive massage to be changed.
Wedge Plus is an interchangeable Theragun attachment with a flat angled shape for gliding movements along muscles. Its geometry allows the nature of contact during percussive massage to be changed.
Micro-Point Plus is an interchangeable Theragun attachment with a textured surface with numerous small raised points. Its geometry allows the nature of contact during percussive massage to be changed.
Supersoft replacement pads are soft contact elements for the corresponding Theragun attachment. Open-cell foam provides a gentle skin-contact surface.
The PowerDot 2.0 electrode pad set is intended to replace consumable components of a compatible electrical stimulator. Magnetic connections simplify attachment, while the hydrogel base provides skin contact.
Pneumatic leg compression massage system with a separate pump and pressure adjustment from 20–100 mmHg.
Pneumatic leg compression massage system with a separate pump and pressure adjustment from 20–100 mmHg.
Pneumatic leg compression massage system with a separate pump and pressure adjustment from 20–100 mmHg.
JetBoots PRO Plus are wireless compression boots with built-in compressors, vibration and infrared LED light. The control panel allows you to set pressure, session duration, vibration and light.
JetBoots PRO Plus are wireless compression boots with built-in compressors, vibration and infrared LED light. The control panel allows you to set pressure, session duration, vibration and light.
JetBoots PRO Plus are wireless compression boots with built-in compressors, vibration and infrared LED light. The control panel allows you to set pressure, session duration, vibration and light.
RecoveryAir Pro Compression is a system for pneumatic leg massage with compression boots and a separate control unit. The chambers inflate sequentially, and pressure is adjustable in 1 mmHg steps.
RecoveryAir Pro Compression is a system for pneumatic leg massage with compression boots and a separate control unit. The chambers inflate sequentially, and pressure is adjustable in 1 mmHg steps.
RecoveryAir Pro Compression is a system for pneumatic leg massage with compression boots and a separate control unit. The chambers inflate sequentially, and pressure is adjustable in 1 mmHg steps.
REMMED KP-16 Black: 200×75 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-8 Brown: 200×75 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-14: 200×65 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-8 New: 200×75 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-15 New: 200×75 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-8 Black: 200×75 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-9 White: 190×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-Kids: 150×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-9 Black: 190×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-10 Brown: 190×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-10 New: 190×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KT-03: 200×90 cm surface, 10 cm padding, accessory shelf.
REMMED KP-10 Plus Black: 190×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-10 Plus White Grey: 190×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-10 White: 190×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-11 Brown: 200×75 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-11 New: 200×75 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-11 White: 200×75 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-9 Brown: 190×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-9 New: 190×70 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-8 White: 200×75 cm surface, 8 cm padding, height 69–94 cm.
REMMED KP-7: 190×70 cm surface, 6 cm padding, accessory shelf.
REMMED KP-7 Brown: 190×70 cm surface, 6 cm padding, accessory shelf.
REMMED KR-75 White: 200×77 cm surface, 8 cm padding, accessory shelf.
REMMED KR-75 Black: 200×77 cm surface, 8 cm padding, accessory shelf.
REMMED KM-04 Black: 190×65 cm surface, 6 cm padding, accessory shelf.
REMMED KM-04 White: 190×65 cm surface, 6 cm padding, accessory shelf.
REMMED R-4V White: four satin glass shelves, including a sliding shelf, and lamp mounting holes on both sides. Dimensions: 55×40×93 cm.
REMMED R-4V Black: four bronze-tinted glass shelves, including a sliding shelf, and lamp mounting holes on both sides. Dimensions: 55×40×93 cm.
REMMED R-7 White: three satin glass shelves and a lamp mounting hole on one side. Dimensions: 54×40×80 cm; castors with a diameter of 50 mm.
REMMED R-7 Black: three bronze-tinted glass shelves and a lamp mounting hole on one side. Dimensions: 54×40×80 cm; castors with a diameter of 50 mm.
REMMED R-9 Black: a chipboard top shelf and two lower bronze-tinted glass shelves; lamp mounting holes on both sides. Dimensions: 55×44×93 cm.
REMMED R-9 White: a chipboard top shelf and two lower satin glass shelves; lamp mounting holes on both sides. Dimensions: 55×44×93 cm.
REMMED R-10 White: two 18 mm chipboard shelves and two drawers with locks and telescopic runners. Dimensions: 55×44×94 cm.
REMMED R-20 Black: three bronze-tinted glass shelves with high edges; each has a usable area of 37.8×27.8 cm. Dimensions: 44×30×78 cm.
REMMED R-20 White: three satin glass shelves with high edges; each has a usable area of 37.8×27.8 cm. Dimensions: 44×30×78 cm.
REMMED R-21 White: three open satin glass shelves and castors with a diameter of 40 mm. Dimensions: 54×30×78 cm; weight: 8 kg.
REMMED R-21 Black: three open bronze-tinted glass shelves and castors with a diameter of 40 mm. Dimensions: 54×30×78 cm; weight: 8 kg.
REMMED R-24 Black: three 18 mm chipboard shelves and castors with a diameter of 40 mm. Dimensions: 54×40×81 cm.
REMMED R-24 White: three 18 mm chipboard shelves and castors with a diameter of 40 mm. Dimensions: 54×40×81 cm.
REMMED R-4 Black: three bronze-tinted glass shelves measuring 50×40 cm and lamp mounting holes on both sides. Dimensions: 55×40×93 cm.
REMMED R-4 White: three satin glass shelves measuring 50×40 cm and lamp mounting holes on both sides. Dimensions: 55×40×93 cm.
REMMED R-71: three satin glass shelves, one sliding plastic tray and a lamp mounting hole on one side. Dimensions: 54×40×80 cm.
REMMED R-41: three 50×40 cm satin glass shelves, a 46×33 cm sliding plastic tray and lamp mounting holes on both sides.
REMMED R-72: three satin glass shelves, two sliding plastic trays and a lamp mounting hole on one side. Dimensions: 54×40×80 cm.
REMMED 14×58 cm bolster with polyurethane foam padding and PU upholstery.
REMMED 16×58 cm bolster with polyurethane foam padding and PU upholstery.
Optional addition of a face opening with a soft hook-and-loop-fastened plug to a table.
Aluminium headrest with clamp locking, a removable cushion and an adjustable arm shelf.
The headrest can be positioned horizontally or at an angle from 15° to 45°, secured by a support.
An opening in the centre of the lying surface accommodates bowel-irrigation procedures.
A dismantlable frame supports padded sections with a plywood base.
This paediatric model has two sections and a headrest with mechanical tilt adjustment from 15° to 60°.
The Gracia Economy version has a dismantlable frame and a 40 mm thick lying surface.
The single-section lying surface has no separate adjustable headrest.
An 800 mm wide two-section model with a mechanically adjustable headrest.
Nothing found — change the filters.























































































































